Videos
Testing Drilling TF-1700H
The videos are the testing drilling video for our TF-1700H.
The testing working piece is:
Material: S45C
Thickness: 35mm
Speed: 50rpm
Feed: 0.1mm/rpm
Diameter ∅: 45mm
The testing working piece is:
Material: S45C
Thickness: 35mm
Speed: 50rpm
Feed: 0.1mm/rpm
Diameter ∅: 45mm
Testing Drilling TF-2000H
The videos are the testing drilling video for our TF-2000H.
The testing working piece is:
Material: S45C
Thickness: 35mm
Diameter ∅: 90mm
You can find from the above videos, we use 90mm Drill to drill through the workpiece in one time without drilling any small holes firstly.
Please read the numbers on the Dial Indicator of our machine, our TF-2000H is with steady, super strong torgue and large machine thurst function while running.
The testing working piece is:
Material: S45C
Thickness: 35mm
Diameter ∅: 90mm
You can find from the above videos, we use 90mm Drill to drill through the workpiece in one time without drilling any small holes firstly.
Please read the numbers on the Dial Indicator of our machine, our TF-2000H is with steady, super strong torgue and large machine thurst function while running.
Testing Tapping TF-2000H
The videos are the testing tapping video for our TF-2000H.
The testing working piece is:
Material: S45C
Thickness: 35mm
Diameter ∅: 58mm
Tapping: 64mm, P6.0
We tap the hole with third time screw thread under the most strict condition also can get the perfect works.
The testing working piece is:
Material: S45C
Thickness: 35mm
Diameter ∅: 58mm
Tapping: 64mm, P6.0
We tap the hole with third time screw thread under the most strict condition also can get the perfect works.